To access the oil filter cartridge, release the engine cover, pull the cover upwards with a sharp tug
General location of oil filter
Fit a 32mm filter wrench socket securely onto the oil filter housing. ALWAYS use the correct tool for this job. Any other tool will damage the oil filter housing
Loosen the oil filter housing by unscrewing anticlockwise. Remove by hand. Old oil will be released, so have a tray handy. Remove filter, clean area and replace filter. Fit any sealing rings supplied with the replacement filter
You are now ready to refill the engine with fresh oil. Open the oil filler cap and use a funnel to avoid spillage
Pour half the new oil in first, wait a minute for the oil to go to the sump, now start adding smaller amounts. Keep checking dipstick level. Fill to the upper mark on the dipstick. DO NOT OVERFILL
Always replace the oil filler cap. Now start the engine and idle for a minute or so. Switch off and check for any leaks, finally check oil level again on dipstick.