Undo the 3 bolts, and pull the air intake duct rearwards/upwards and disconnect the intake hose
... and remove the intake duct
Lift the rubber cap and disconnect the airflow sensor wiring plug
Prise up the rubber cap ...
... squeeze together the sides and disconnect the air flow sensor wiring plug
Release the clamp and disconnect the air outlet hose from the air cleaner assembly.
Undo the 2 bolts securing the assembly to the inner wing, then lift it from position
. Where necessary unclip the coolant hose as the assembly is withdrawn.
Air cleaner assembly retaining bolts
Undo the 5 bolts and remove the lower section of the air cleaner assembly
Undo the bolts and remove the lower section
Pull the filter element from place.
Clean the air filter housing, removing all debris.
Slide the new filter element into place, ensuring it locates correctly with the housing
Slide the new filter element into place. Note the locating lug
The remainder of refitting is a reversal of removal.
All OnDemand jobs for your car
1 year subscription