The sump plug is located on the base of the engine. It is accessed underneath the car. You will need to remove the undertray
Undo the fixings using an 8mm socket, and carefully remove the undertray. Caution – it is heavy and must be fully supported during removal
Don't forget to have a suitably sized receiving tray in place
With an oil catchment tray in position, use a 13mm spanner or socket to carefully remove the sump plug and fully drain the oil.
When the sump has emptied, wipe clean the sump plug area with a paper towel and refit the sump plug and washer
Replace (new) sump plug and washer – do not over tighten. Replace undertray