Skip to main content
Menu
0 items

Haynes On Demand sales are currently limited to residents of the United Kingdom only.

Air filter change Citroen Berlingo Multispace 1996 - 2010 Petrol 1.4

OnDemand step-by-step maintenance & repair BETA

Citroen
Berlingo Multispace
1996 - 2010  | 1.4 Air filter change

  • time 5 to 45 minutes
  • difficulty 1

Pre-September 2002 1.4 litre models

1 Slacken the retaining clip securing the air cleaner lid to the throttle housing (see illustration) .
Slacken the retaining clip (arrowed) securing the air cleaner lid to the throttle housing – early 1.4 litre models
2 Disconnect the breather hose at the front of the air cleaner lid by slackening the retaining clip (where fitted) or depressing the sides of the quick-release fitting.
3 Undo the bolt securing the air intake duct to the support bracket on the engine, and the two screws securing the intake duct to the front body panel (see illustration) .
Undo the bolt (arrowed) securing the air intake duct to the support bracket – early 1.4 litre models
4 Detach the air cleaner lid from the throttle housing, while at the same time lifting the air cleaner housing upwards to release the lower mounting. Slide the unit sideways slightly and withdraw it, together with the intake duct, from the engine compartment. Recover the throttle housing sealing ring from the air cleaner lid.

1.6 litre models and post-September 2002 1.4 litre models

5 Slacken the clip securing the air cleaner lid to the throttle housing (see illustration) .
Slacken the clip securing the air cleaner lid to the throttle housing – later models
6 Depress the sides of the quick-release fitting and detach the engine breather hose from the air cleaner lid (see illustration) .
Depress the quick-release fitting and detach the breather hose from the air cleaner lid
7 Undo the nut securing the air intake duct to the front body panel (see illustration) . Lift the duct off the mounting stud and slide it sideways slightly to disengage the additional retaining tab.
Undo the nut (arrowed) securing the air intake duct to the front body panel – later models
8 Release the plastic retainer securing the air cleaner housing to the support bracket by turning it through 90° (see illustration) .
Turn the plastic retainer through 90° to release it – later models
9 Detach the air cleaner lid from the throttle housing, while at the same time lifting the air cleaner housing upwards to release the lower mounting. Slide the unit sideways slightly and withdraw it, together with the intake duct, from the engine compartment (see illustrations) . Recover the throttle housing sealing ring from the air cleaner lid.
Detach the air cleaner lid from the throttle housing . . .
. . . then lift the air cleaner assembly upwards to release the lower mounting – later models

All models

10 With the air cleaner assembly on the bench, undo the screws securing the air cleaner lid to the base. Lift off the lid and remove the air filter element, noting which way up it is fitted (see illustrations) .
Undo the screws (arrowed) securing the air cleaner lid to the base . . .
. . . lift off the air cleaner lid . . .
. . . and remove the air filter element
11 Wipe clean the inside of the air cleaner lid and base then fit the new element, ensuring it is correctly located.
12 Locate the lid correctly on the base and securely tighten the retaining screws.
13 Refit the air cleaner assembly to the car.
All OnDemand jobs for your car
£9.99
1 year subscription

Already purchased this job? Log into your account to view