Skip to main content
Menu
0 items

Haynes On Demand sales are currently limited to residents of the United Kingdom only.

Checking tyre pressures Fiat 500 2004 - 2012 Diesel 1.3 Multijet

OnDemand step-by-step maintenance & repair BETA

Fiat 500 2004 - 2012  | 1.3 Multijet Checking tyre pressures

  • time 5 minutes
  • difficulty 1
You can use a pencil-type gauge, it is often the cheapest to purchase and rarely goes wrong
Take a quick look at the tyre treads and sidewall condition If you need to change a wheel, click below
- Close + Open

Roadside wheel change

Warning: Do not change a wheel in a situation where you risk being hit by other traffic. On busy roads, try to stop in a lay-by or a gateway. Be wary of passing traffic while changing the wheel – it is easy to become distracted by the job in hand.

Changing the wheel

The spare wheel and tools are stored in the luggage compartment. Fold back the floor covering and lift up the cover panel.
Unscrew the retaining bolt, and lift out the tool container, followed by the spare wheel.
Where applicable, using the screwdriver provided, prise off the wheel trim or centre cover for access to the wheel bolts. Models with alloy wheels may have special locking bolts – these are removed with a special tool, which should be provided with the wheel brace (or it may be in the glovebox).
Slacken each wheel bolt by a half turn, using the wheel brace. If the bolt are too tight, DON’T stand on the wheel brace to undo them – call for assistance from one of the motoring organisations.
Two jacking points are provided on each side – use the one nearest the punctured wheel. Locate the jack head at the point in the lower sill flange indicated by the indentation in the metal sill (don’t jack the vehicle at any other point of the sill, nor on a plastic panel). Turn the jack handle clockwise until the wheel is raised clear of the ground.
Unscrew the wheel bolts, and remove the wheel.
Fit the spare wheel, and screw in the bolts. Lightly tighten the bolts with the wheel brace, then lower the vehicle to the ground. Securely tighten the wheel bolts. Note that the wheel bolts should be slackened and re-tightened to the specified torque at the earliest possible opportunity.
Roadwheel bolts: Nm Ibf ft
  Steel wheel 85 63
  Aluminium wheel 98 72
All OnDemand jobs for your car
£9.99£5.99
1 year subscription

Already purchased this job? Log into your account to view