Skip to main content
Menu
0 items

Haynes On Demand sales are currently limited to residents of the United Kingdom only.

Oil filter change Ford C-Max 2003 - 2010 Diesel 1.6 TDCi

OnDemand step-by-step maintenance & repair BETA

Ford C-Max 2003 - 2010  | 1.6 TDCi Oil filter change

  • time 15 minutes
  • difficulty 3
General location of the oil filter cartridge
Here it is
Fit a 27mm filter wrench socket securely onto the oil filter housing. ALWAYS use the correct tool for this job. Any other tool will damage the oil filter housing
Loosen the oil filter housing by unscrewing anticlockwise. Remove by hand. Old oil will be released, so have a tray handy. Remove filter, clean area and replace filter. Fit any sealing rings supplied with the replacement filter
You are now ready to refill the engine with fresh oil. Unscrew the oil filler cap and add a funnel
Always using a funnel, pour half in first, wait a minute for the oil to go to the sump. Now add smaller amounts, and keep checking the dipstick level. Fill to the upper mark on the dipstick. DO NOT OVERFILL
Keep checking the dipstick level, the final level should read just below the MAX position on the dipstick
The MAX-MIN dipstick positions
Always replace the dipstick and oil filler cap. Now start the engine and idle for a minute or so. Switch off and check for any leaks, finally recheck the oil level again on the dipstick