Skip to main content

Haynes On Demand sales are currently limited to residents of the United Kingdom only.

Air filter change Ford Focus 2005 - 2011 Diesel 2.0 TDCi

OnDemand step-by-step maintenance & repair BETA

Ford Focus 2005 - 2011  | 2.0 TDCi Air filter change

  • time 5 to 45 minutes
  • difficulty 1
Caution: Never drive the vehicle with the air cleaner filter element removed. Excessive engine wear could result, and backfiring could even cause a fire under the bonnet.
1 The air filter element is located in the air cleaner assembly on the left-hand side of the engine compartment.
2 Remove the plastic cover (where fitted) from the top of the engine.
3 Disconnect the wiring plug from the mass airflow meter, and slacken the clamp securing the air outlet hose to the filter cover (see illustration) .
Slacken the clamp (arrowed) securing the air outlet hose to the filter cover
4 Undo the bolts, and lift the filter cover from place (see illustrations) .
Filter cover bolts (arrowed) – 1.6 litre models . . .
. . . 1.8 litre models (arrowed) . . .
. . . and 2.0 litre models (arrowed)
5 Note which way round it’s fitted, then lift the air filter element from the housing (see illustrations) .
Lift the element from place – 1.6 litre models . . .
. . . 1.8 and 2.0 litre models
6 Wipe clean the inner surfaces of the cover and main housing, then locate the new element in the housing, making sure that the sealing lip is correctly engaged with the edge of the housing.
7 Refit the filter cover and tighten the bolts securely.
8 Reconnect the outlet hose and the wiring plug where applicable. Tighten the hose clamp securely, then refit the plastic cover over the engine.
All OnDemand jobs for your car
1 year subscription

Already purchased this job? Log into your account to view