Skip to main content
Menu
0 items

Haynes On Demand sales are currently limited to residents of the United Kingdom only.

Oil filter change Honda CR-V 2007 - 2012 Diesel 2.2 i-CTDi

OnDemand step-by-step maintenance & repair BETA

Honda CR-V 2007 - 2012  | 2.2 i-CTDi Oil filter change

  • time 15 minutes
  • difficulty 3
The location of oil filter is here at thew front of the engine
Here it is up close
Using a 76/14F filter wrench socket, fit the tool securely onto the oil filter housing. ALWAYS use the correct tool for this job. Any other tool will damage the oil filter housing
Loosen the oil filter housing by unscrewing it anti-clockwise. Remove by hand. Old oil will be released, so have a tray handy. Remove the filter, clean the area and replace the filter. Fit any sealing rings supplied with the replacement filter
You are now ready to refill the engine with fresh oil. Unscrew the oil filler cap and add a funnel
Always use a funnel and pour half in first, then wait a minute for the oil to go to the sump. Now add smaller amounts, and keep checking dipstick level. Fill to the upper mark on the dipstick. DO NOT OVERFILL
Keep checking the dipstick level. The final level should read just below the MAX position on the dipstick
MAX-MIN dipstick positions
Always replace the dipstick and oil filler cap. Now start the engine and idle for a minute or so. Switch off and check for any leaks. Finally check oil level again on dipstick