Skip to main content
Menu
0 items

Haynes On Demand sales are currently limited to residents of the United Kingdom only.

Oil filter change Hyundai i30 2007 - 2012 Diesel 2.0 CRDi

OnDemand step-by-step maintenance & repair BETA

Hyundai i30 2007 - 2012  | 2.0 CRDi Oil filter change

  • time 15 minutes
  • difficulty 3
Here is the location of the oil filter cartridge
Using a specific oil filter wrench socket for this Hyundai, fitting the tool securely onto the oil filter housing. ALWAYS use the correct tool for this job. Any other tool will damage the oil filter housing
Loosen the oil filter housing by unscrewing anti-clockwise. Remove by hand. Old oil will be released, so have a tray handy. Remove thhee filter, clean the area and replace t filter. Fit any sealing rings supplied with the replacement filter
You are now ready to refill the engine with fresh oil. Unscrew the oil filler cap and add a funnel
Always using a funnel, pour half in first, wait a minute for the oil to reach the sump, then add smaller amounts
Keep checking the dipstick level and fill to the upper mark on the dipstick. DO NOT OVERFILL
The MAX-MIN dipstick positions
Always replace the dipstick and oil filler cap. Now start the engine and idle for a minute or so. Switch off and check for any leaks. Finally, check the oil level again on the dipstick