Do not change a wheel in
a situation where you risk being hit by another vehicle. On busy roads, try to
stop in a lay-by or a gateway. Be wary of passing traffic while changing the
wheel - it is easy to become distracted by the job in hand.
a puncture occurs, stop as soon as it is safe to do so.
on firm level ground, if possible, and
well out of the way of other traffic. If
jacking on a slope is unavoidable, chock the wheel diagonally opposite the one
to be removed on the downhill side, using the chock provided in the toolkit.
hazard warning lights if necessary.
the ground is soft, use a flat piece of wood to spread the load under the jack.
The vehicle jack, toolkit and spare wheel are located under the luggage compartment floor panel. Lift the panel then rotate the catch clockwise and remove the toolkit cover from the left-hand side of the luggage compartment.
Rotate the catch clockwise and remove the toolkit cover.
Remove the toolkit and jack, then release the fastener and lift out the spare wheel.
Rotate the cap anti-clockwise and lift out the spare wheel
Using the wheel brace supplied, slacken the roadwheel bolts half a turn each. The wheels may have special locking bolts – these are removed with a special tool, which should be provided with the wheelbrace (or it may be in the glovebox).
Use the special adapter to slacken the locking wheel nut
Position the jack head beneath the jacking point under the sill closest to the punctured wheel. Engage the jack head with the sill flange, then smoothly raise the vehicle undo the tyre is clear of the road surface.
Position the head of the jack under the sill jacking point
Unscrew the wheel bolts, and remove the wheel.
Undo the bolts and remove the wheel
Fit the spare wheel, and screw-in the bolts. Lightly tighten the bolts with the wheelbrace, then lower the vehicle to the ground. Securely tighten the wheel bolts. Note that the wheel bolts should be slackened and retightened to 130 Nm (96 Ibf ft) at the earliest possible opportunity.
Fit the spare wheel and tighten the retaining bolts
If a temporary space-saver spare wheel is fitted, do not exceed 50 mph (80 kmh), and take particular care when cornering.