Skip to main content
0 items

Oil change Rover 6 2011 - 2013 | Haynes Manuals

Rover 6 2011-2013

Rover 6

2011 - 2013
Time
25 minutes
Difficulty
The sump plug is located on the base of the engine, and it is accessed from underneath the car
You will have to remove the undertray to access the sump plug
use a 10mm socket to remove the fixings. Caution! The undertray is heavy and must be fully supported during removal
Don't forget to place a suitably sized receiving tray in place
With an oil catchment tray in position, use a 15mm spanner or socket to carefully remove the sump plug and fully drain the oil. When the sump has emptied, wipe clean the sump plug area with a paper towel and re-fit the sump plug and washer
Replace (new) sump plug and washer. Do not over-tighten. Refit the undertray

Find a Haynes product for your Rover:

Search by registration mark

(Cars only)

Search by make & model

Year