Your 2019 Subaru Outback is designed for both urban and off-road terrains. As you tread different paths, the likelihood of your windshield facing the wrath of flying debris is high. A minor pebble strike can lead to a windshield crack which, if ignored, may grow and jeopardize visibility and safety. Before you wonder how to fix windshield crack on your own, let's explore a step-by-step guide tailored for Subaru Outback owners.
Assess the Damage
Before diving into the repair, gauge the extent of the damage:
- Size & Depth: If the crack is smaller than a dollar bill and not too deep, it can be fixed at home. Larger cracks, however, require professional attention.
- Position: Cracks at the edge might compromise the windshield's structural integrity. Such cracks are better addressed by professionals.
Gather the Necessary Supplies
For a successful DIY repair, you need:
- A windshield repair kit (available at auto parts stores)
- Razor blade or sharp knife
- Clean cloth or paper towel
- Alcohol or window cleaner
Prepare the Windshield
- Clean the Area: Use window cleaner or alcohol to clean the cracked area. Ensure it's free of dust or debris.
- Temperature Check: Best results are achieved when the windshield temperature is between 50°F and 75°F. Too hot or too cold can affect the repair process.
Using the Windshield Repair Kit
- Seal the Crack: Place the provided clear, plastic device over the windshield crack. This device acts as a reservoir for the resin.
- Apply Resin: Pour the resin into the device, ensuring it seeps into the crack. The resin acts as a filler and adhesive to seal the crack.
- Squeeze & Spread: Use the kit's plunger to push the resin into the crack, ensuring it spreads evenly. This step might need repetition to fill the crack thoroughly.
- Let It Cure: Once filled, let the resin cure for the time specified in the kit's manual. Usually, it's about 5-10 minutes.
- Remove Excess Resin: Using a razor blade or sharp knife, carefully scrape off excess resin to ensure a smooth surface. It should be flush with the windshield's surface.
Finishing Touches
- Sun Cure: Sunlight helps in further curing the resin. Park your Subaru Outback in direct sunlight for a few hours.
- Clean & Polish: Once completely cured, clean the repaired area with window cleaner. Your windshield should now be clear and free of the distracting crack.
Important Tips & Considerations
- Act Fast: The sooner you address a windshield crack, the better the results. Dirt and debris can accumulate in a crack, making repairs challenging and less effective.
- Safety First: If the crack obstructs the driver's field of vision or if you're unsure of the repair, seek professional help. Safety should always be paramount.
- Limitations: DIY kits are effective for small cracks or chips. Larger or complex cracks might not be completely addressed with such kits.
When to Seek Professional Help
If the crack reappears, spreads, or if you're unsatisfied with the DIY outcome, it might be time to consult professionals. They possess the tools and expertise to ensure a comprehensive fix or might recommend a windshield replacement if necessary.
Your Subaru Outback deserves the best care. While a minor windshield crack might seem negligible, it's crucial for safety and aesthetics to address it promptly. This DIY guide empowers you to tackle small cracks, ensuring your Subaru remains in impeccable condition, ready to face new adventures on the horizon. Remember, when in doubt, always consult with a professional to ensure the highest safety standards.