Skip to main content

Oil change GT 2003 - 2010 | Haynes Manuals


2003 - 2010
25 minutes
The sump plug located on the base of the engine, and is accessed underneath the car
You will need to remove the sump cover
Undo the fixings – use 10mm and Torx-30 sockets
Here's the sump plug
Do not forget to havee a suitably sized receiving tray in place
With an oil catchment tray in position, use an 8mm Allen Key socket to carefully remove the sump plug. Fully drain the oil. When the sump has emptied, wipe clean the sump plug area with a paper towel and refit the sump plug and washer
Replace (new) sump plug and washer. Do not overtighten