Battery check Dodge Caliber 2006 - 2010 | Haynes Manuals
You are here
Locate the battery
Remove the air duct to fully access the battery
Check the Negative (-) terminal clamp is tight
Check the Positive (+) terminal clamp is tight. CAUTION – if using a spanner to tighten terminal, be careful not to short the spanner on the bodywork
Check battery is generally secure, if loose, tighten the battery retainer
The battery retaining clamp position
Tighten if required, using a 13mm socket or spanner. Not too tight as you may damage the battery casing