The sump plug is located on the base of the engine. It is accessed underneath the car
You will need to remove the undertray
Undo the fixings - use Torx-25, Torx-30 and 13mm sockets
Carefully remove the undertray
Do not forget to place a suitably sized receiving tray beneath
Using a 6mm (Allen key) socket, carefully remove the sump plug and fully drain the oil. When the sump has emptied, wipe clean the sump plug area with a paper towel and refit a new sump plug and washer
Do not over tighten - replace the undertray
Find a Haynes product for your Volkswagen:
Search by registration mark
Search by make & model